Scroll to top ⬆
Loading...

Login

Status

No call log entries.
Status:
●
Background conn. status:
● DAPNET | ● APRS
Active config profile:
Active connector:
Modem mode:
Modem RX/TX frequency, power:
Connected to:

Log

No log entries.

openSPOT2 info

Hardware version:
Firmware version:
v
Callsign database version:
Bootloader version:
Device ID:
USB data:
Uptime:
Device time:

Connectors

Active connector:
Edit connector:

General settings

Change to Null connector after last call (sec, 0 to disable):
Change after last call from:
Modem Modem or network

Null connector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:

DMR/DMRplus dongle

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
DMR ID:
Reflector:
Reflector ID:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

DMR/Homebrew/MMDVM

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Protocol:
Homebrew MMDVM
Server:
Server address:
Port (UDP):
Callsign:
DMR ID:
URL:
Server password: (show)
Backup server:
Backup server address:
Backup server port (UDP):
Backup server password: (show)
Backup server activate connect timeout (sec):
Auto connect to ID (0 to disable):
Group call Private call
Auto connect TDMA channel:
Auto connect interval (sec):
DMO mode TDMA channel:
Route cross mode calls to ID:
Group call Private call
Reroute DMR TG9 calls to ID (0 to disable):
Group call Private call
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

D-STAR/DCS/XLX

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Module:
Server address:
Port (UDP):
CCS port (UDP):
Callsign:
Local module:
Reflector ID:
Remote module:
RX timeout (sec):
Connect retry interval (sec):

D-STAR/REF/XRF (DPlus/DExtra)

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
List:
Reflectors Gateways
Server:
Module:
Server address:
Port (UDP):
CCS port (UDP):
Callsign:
Local module:
Reflector/gateway ID:
Remote module:
RX timeout (sec):
Connect retry interval (sec):

System Fusion/FCS

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server / room number:
Server address:
Port (UDP):
Callsign:
DMR/CCS7 ID:
Reflector:
Room number:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

System Fusion/YSFReflector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
Callsign:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

SharkRF IP Connector Client

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
ID:
Server password: (show)
Callsign:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

SharkRF IP Connector Server

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Port (UDP):
Server password: (show)
RX timeout (sec):

AutoCal

AutoCal analyzes an incoming transmission and tries to find out the frequency difference (RX offset) between the openSPOT2 and the transmitter.

Make sure the correct modem mode is selected. Hold the PTT button on your radio until all 3 phases are completed.
Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Phase:
Status:
Progress:
Last found offset:
N/A

DAPNET

This connector uses the POCSAG frequency which can be set on the Settings page, POCSAG settings section.
Modem mode:
Server:
Server address:
Port (TCP):
Use your DAPNET transmitter login and auth key here. These are not the same as your DAPNET user account. A separate transmitter registration is needed. See this page for more information.
Transmitter callsign:
Transmitter auth key: (show)
RX timeout (sec):
Connect retry interval (sec):

Only transmit specified RICs

RIC #1:
RIC #2:
RIC #3:
RIC #4:
RIC #5:
RIC #6:
RIC #7:
RIC #8:

NXDNReflector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
Callsign:
Talkgroup ID:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

APRS

This special background connector can be used for setting up a connection to the APRS network. This enables device location broadcasting, forwarding GPS position data from transceivers, and messaging (APRS chat).
Server:
Server address:
Port (TCP):
Callsign:
RX timeout (sec):
Connect retry interval (sec):
Send incoming messages to POCSAG RIC (0 to disable):

Device location

QTH locator (map):
Latitude (decimal degrees):
Longitude (decimal degrees):
Height (ASL, meters):
Location symbol on map (select):
Location comment:

D-STAR location forwarding

Forced SSID:
Forced symbol (select):
Forced comment:

C4FM location forwarding

Forced SSID:
Forced symbol (select):
Forced comment:
Note: DMR location forwarding to the APRS network is done by the DMR server, not the openSPOT2. Please check the used DMR network's documentation on how to set up your radio.

P25Reflector

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Server:
Server address:
Port (UDP):
Callsign:
Talkgroup ID:
Reroute group calls from net to ID:
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):

POCSAG/DAPNET

Message queue
No messages
State:
Current timeslot:
Send to:
DAPNET Modem
Message:
Destination callsign:
Destination transmitter group:
Destination transmitter group ID:
Type:
Message Alert message Alert

DAPNET login information

DAPNET callsign:
DAPNET user password: (show)
Use your DAPNET user (not transmitter) callsign and password key here. These are required for sending messages to DAPNET.

ID database lookup

ID or callsign:
Preferred ID type:
DMR/P25/CCS7
DMR talkgroup
NXDN

Upgrade

State:

Modem settings

Active modem mode:
Change to mode:
Modem modes not supported by the active connector are grayed out.

Frequency

Modem frequency (MHz):
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Transmit power:

CW ID

ID to transmit:
Speed (WPM):
Interval (sec):
TX delay (sec):

Modulation

Modulation mode:
Inner deviation (Hz):

Other settings

Call hang time (ms):
BCLO level (dBm, 0 - off):
Ignore RX after TX (ms):
Sensitivity level:
Filter gain:
AGC low threshold (dBm):
AGC high threshold (dBm):

Configuration profile

Change active profile

Active profile slot:
Change to profile slot:

Change profile on timeout

Change after last call (sec, 0 to disable):
Change after last call from:
Modem Modem or network
Change to profile slot:

Profile names

Profile #1:
Profile #2:
Profile #3:
Profile #4:
Profile #5:

Copy

Source:
Destination:

Export/import file

Profile:
Status:
Idle
Progress:

Miscellaneous

Firmware upgrade

Auto upgrade at (hh:mm):
Auto upgrade RX/TX delay (sec):
Check interval (hour):

SharkRF Network

Voice announcements

Server:
Server host:
Server port (UDP):
Net state announcement int. (sec):
Source ID:
Profile query/change base ID:
Connector query ID:
Connector query callsign / DTMF:
.......I (replace 7 dots with 7 spaces, or DTMF D)
Connector query DTMF code:
IP address query ID:
IP address query callsign / DTMF:
.......A (replace 7 dots with 7 spaces, or enter DTMF B)
IP address query DTMF code:

Location settings

Click here if you want to set up sending the device location to the APRS network.
QTH locator (map):
Latitude (decimal degrees):
Longitude (decimal degrees):
Height (AGL, meters):
Height (ASL, meters):
Description (city, country):

DMR settings

Color code (CC):
Echo ID:
Preferred talkgroup list:
Default TGIF
Default cross mode source DMR ID:
Force source ID from modem (0 - disable):
Force talker alias to DMR network:

D-STAR settings

Echo callsign:

C4FM settings

Special command/cross mode private call DTMF code:
Cross mode group call DTMF code:
Default callsign for cross mode calls:
Echo DGID:
DGID from modem:
Replace DGID to modem:
Replace DGID to net:

NXDN settings

Radio Access Number (RAN):
Echo ID:
Default cross mode destination ID:
Default cross mode source ID:

P25 settings

Network Access Code (NAC):
Echo ID:
Default cross mode source P25 ID:

POCSAG settings

POCSAG frequency (MHz):
Bitrate:
TX delay in other modem modes (sec):

Allowed timeslots

Lock settings

ID #1 (0 to disable):
ID #2 (0 to disable):
ID #3 (0 to disable):
Callsign #1 (empty to disable):
Callsign #2 (empty to disable):
Callsign #3 (empty to disable):

Miscellaneous

LED brightness:

Network status

Current wireless mode:
Internet connection quality:
● (unknown)
Wireless regulatory domain:

Current configuration

Mode:
IP address:
Netmask:
Gateway:
DNS server #1:
DNS server #2:

Traffic
Network RX total:
N/A
Network TX total:
N/A
Gateway/internet RX total:
N/A
Gateway/internet TX total:
N/A
Connector RX total:
N/A
Connector TX total:
N/A

Network settings

Country of operation:
Change web int. password: (show)
Hostname:
Dejitter queue length (ms):
Internet conn. check interval (sec):
Syslog server:
Syslog port (UDP):

NTP settings

NTP server:
NTP last sync at:
NTP last synced to:
Device time:

Wireless scan

No scan results available.

Wireless settings

SSID #1:
Key #1: (show)
BSSID #1:
SSID #2:
Key #2: (show)
BSSID #2:
SSID #3:
Key #3: (show)
BSSID #3:
SSID #4:
Key #4: (show)
BSSID #4:
SSID #5:
Key #5: (show)
BSSID #5:

Access point mode settings

AP SSID:
AP key:
Channel number:

IP settings

IP configuration mode:

MAC settings

Current MAC address:
Browser client MAC address:
Factory MAC address:
AP MAC address:

Quick setup

Please select the type of your radio.
Do you want to set up location broadcasting and forwarding GPS position data from your transceiver to the APRS network?

Owner information

Please enter your callsign and IDs below, and then click on the Save button. You can ignore the IDs in case you don't have them (you can register a DMR ID here).
Callsign:
DMR/P25/CCS7 ID:
NXDN ID:
Do you want to re-run the initialization setup?

Quick setup

General DMR settings

Radio frequency (MHz):
Color code:
Do you have voice quality issues? Run
Please select the DMR network/server type to continue.

Quick setup

DMR/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this TG (set to 0 if not needed):

Quick setup

DMR/ DMRplus / MARC / TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Reflector (set to 0 if not needed):

Quick setup

DMR/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

DMR/YSFReflector

Server:
Callsign:

Quick setup

DMR/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

DMR/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

DMR/NXDNReflector

Server:
Callsign:

Quick setup

Please select the D-STAR reflector/server type to continue.

Quick setup

D-STAR/REF/XRF

Radio frequency (MHz):
Server:
Module:
Callsign:

Quick setup

D-STAR/DCS/XLX

Radio frequency (MHz):
Server:
Module:
Callsign:

Quick setup

D-STAR/Gateway

Radio frequency (MHz):
Server:
Module:
Callsign:

Quick setup

D-STAR/SharkRF IP Connector client

Radio frequency (MHz):
Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

D-STAR/SharkRF IP Connector server

Radio frequency (MHz):
Server port (UDP):
Server password: (show)

Quick setup

General C4FM settings

Radio frequency (MHz):
Radio deviation mode:
Normal Half
Please select the C4FM network/server type to continue.

Quick setup

C4FM/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

C4FM/YSFReflector

Server:
Callsign:

Quick setup

C4FM/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this TG (set to 0 if not needed):

Quick setup

C4FM/ DMRplus / MARC / TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Reflector (set to 0 if not needed):

Quick setup

C4FM/NXDNReflector

Server:
Callsign:

Quick setup

C4FM/P25Reflector

Server:
Callsign:

Quick setup

C4FM/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

C4FM/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General NXDN settings

Radio frequency (MHz):
Radio Access Number (RAN):
Do you have voice quality issues? Run
Please select the NXDN network/server type to continue.

Quick setup

NXDN/NXDNReflector

Server:
Callsign:

Quick setup

NXDN/BrandMeister

Server:
Callsign:
DMR ID:
Server password: (show)
Link this TG (set to 0 if not needed):

Quick setup

NXDN/ DMRplus / MARC / TGIF / XLX

Server:
Callsign:
DMR ID:
Server password: (show)
Reflector (set to 0 if not needed):

Quick setup

NXDN/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

NXDN/YSFReflector

Server:
Callsign:

Quick setup

NXDN/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

NXDN/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General P25 settings

Radio frequency (MHz):
Network Access Code (NAC):
Do you have voice quality issues? Run
Please select the P25 network/server type to continue.

Quick setup

P25/P25Reflector

Server:
Callsign:

Quick setup

P25/FCS

Server / room number:
Callsign:
DMR/CCS7 ID:

Quick setup

P25/YSFReflector

Server:
Callsign:

Quick setup

P25/SharkRF IP Connector client

Server:
Server address:
Server port (UDP):
Server password: (show)
ID:
Callsign:

Quick setup

P25/SharkRF IP Connector server

Server port (UDP):
Server password: (show)

Quick setup

General POCSAG settings

POCSAG frequency (MHz):

DAPNET

Server:
Callsign:
Transmitter auth key: (show)

Quick setup

APRS settings

Server:
Callsign:

Device location

QTH locator (map):
Latitude (decimal degrees):
Longitude (decimal degrees):
Height (ASL, meters):
Location symbol on map (select):
Location comment:

Welcome!

Thank you for using the openSPOT2!
You can re-run this initial setup anytime by clicking on the "Re-run initial setup" button on the Quick Setup page.
Country of operation:

Wi-Fi setup

Please choose a Wi-Fi network to connect.
If the openSPOT2 can't connect to the selected network, and the web interface becomes unreachable, switch back the device to AP (Access Point) mode by pressing and holding the button on the box for 3 seconds. The status LED should be solid or pulsating white after releasing it.
No scan results available.